The Centre for Research & Development (R&D) of Viswajyothi College of Engineering and Technology (VJCET) was established in 2010 with a view to initiate, nurture productive and interactive engagement with staff and students to initiate new ideas in-order to kindle the research interest among them.
Research is an integral and important part of any higher education system. VJCET in addition to basic research promotion, which is the backbone of any applied research, the Institute also gives adequate importance and support to applied research. Faculty and students are encouraged for various engineering and interdisciplinary projects to register growth in research by generation of resources, patents, research collaborations and establishing links with industry.
Students undertake research projects as a component of their education programme itself. Teachers conduct research as an integral part of their responsibilities since this enables them to assimilate and disseminate the knowledge as well as generate new knowledge. At VJCET, the faculty members are encouraged to publish their findings in reputed journals and present papers at conferences. Support is given to participate in national and international conferences and thereby network with experts from India and abroad.
| NAME | POST |
|---|---|
| Dr. Peter Reji | Dean, R & D Centre |
| Dr. Cyriac M. Odackal | AD Dept. Coordinator |
| Dr. Neena M Joseph | CE Dept. Coordinator |
| Ms. Anju Markose | CG Dept. Coordinator |
| Dr. Tony D | ECE, Dept. Coordinator |
| Ms. Juliet M Murali | IT Dept. Coordinator |
| Ms. Mereya Baby | EEE Dept. Coordinator |
| Dr. Aravind S | ME Dept. Coordinator |
| Ms. Sona Maria Abraham | S&H Dept. Coordinator |
| Dr. Jose Mamman | MBA Dept. Coordinator |
Dr. PETER REJI RAMANATT earned a Bachelor's degree in Electronics and Telecommunication Engineering from Government Engineering College, Rewa (M.P.), followed by a Master's degree in Communication and Radar Engineering from the prestigious Indian Institute of Technology, Delhi. In 1993, Dr. Peter embarked on a distinguished career by joining the Indian Air Force (IAF) as a Pilot Officer. He further bolstered his expertise by obtaining a Ph.D. in Aerospace Engineering (Avionics) from Jain University, Bangalore. Over the course of his 30-year tenure in the Air Force, he rose to the rank of Group Captain, and retired from service in 2024. His exceptional track record includes curriculum design, development, and delivery, honed through extensive experience in education, training, and administration.
His experience in aircraft systems is unparalleled. He dedicated 17 years to their maintenance and administration within the Indian Air Force. His leadership qualities shone brightly as Commanding Officer of the Technical Training Institute from 2014 to 2016, responsible for training aircraft engineers, technicians, and pilots. He was involved in the research, development and testing of avionics system at DRDO, Bengaluru for a period of five years. He has also worked with Israel’s design team, for 4 years, for the design and development of aircraft systems at Israel, heading the Project Management team.
Dr. Peter revolutionized training methodologies within the IAF, imparting technical expertise to engineers, aircrew, and technicians. Furthermore, he played a pivotal role in the acceptance of AWACS aircraft from Israel and ground stations from Russia, demonstrating his exceptional leadership and negotiation skills. Dr. Peter had been bestowed “Sword of Honour” at Air Force Technical College, Bangalore for the “Best All-Round Officer”. He has also received “President’s Medal” for standing 1 st in overall merit at Air Force Technical College, Bangalore.
Being a true visionary, his research delved into the feasibility of replacing traditional wired communication in aircraft display systems with wireless technology. His commitment to innovation was evident in his rigorous analyses, simulations, and the development of a working hardware prototype.
Throughout his illustrious career, Dr. Peter has consistently demonstrated exceptional leadership and organizational skills. His ability to foster teamwork, make decisive judgments, and drive initiatives forward makes him a valuable asset. In 2024, he joined VJCET as Dean of Research & Development, bringing his wealth of experience and leadership to the next generation.
| PH.D RESEARCH GUIDES | UNIVERSITY & DEPARTMENTS | CURRENTLY ASSOCIATED OR NOT | YEAR OF RECOGNITION | NAME OF RESEARCH SCHOLARS |
|---|---|---|---|---|
| Dr. Anita Brigit Mathew | KTU, CSE | Yes | 2021, RE-RECOGNIZED IN 2023 UNDER NEW REGULATION | Recognized as Research Guide under KTU. Students are not assigned |
| Dr. Sony Kurian | KTU, EEE | Yes | 2020 | Recognized as Research Guide under KTU. Students are not assigned |
| Dr. K. Shunmugesh | KTU, ME | Yes | 2020, RE-RECOGNIZED IN 2023 UNDER NEW REGULATION | Recognized as Research Guide under KTU. Students are not assigned |
Department of Computer Science & Engineering
There are two faculty members with Ph.D., who are currently working in this department. At present, nine faculty members are doing Ph.D. in reputed universities. During the last five years, one research scholar was awarded Ph.D. under the guidance of Dr. K.N. Ramachandran Nair. Faculty members of the CSE department continuously publish articles in Scopus indexed journals/conferences. The department conducts workshops, ATAL sponsored faculty development programmes and seminars on recent trends in computer science such as Artificial Intelligence, Data Science, Blockchain etc. The faculty member recognized as research guide under APJ Abdul Kalam Technological University from 2021 is detailed below.
Research Guides
Dr. Anita Brigit Mathew, Head of AD Department is a Research guide under CSE stream.
Department of Electrical & Electronics Engineering
The EEE department organizes training programmes, workshops and seminars on recent trends in their field. Currently, two faculty members with Ph.D are working in this department. Faculty members of the EEE department have received grants for projects from governmental agencies such as Board of research in Nuclear Science under Department of Atomic Energy. The EEE department encourages their faculties to publish articles in Scopus indexed journals/conferences. One faculty member is recognized as a research guide under APJ Abdul Kalam Technological University.
Research Guide
Dr. Sony Kurian
Department of Mechanical Engineering
Currently four faculty members with Ph.D. are working in this department. Faculty members of ME department publish articles in SCI/Scopus indexed journals/conferences. Several Faculty members are currently pursuing Ph.D in reputed Universities. This department organizes different seminars, ATAL sponsored training programmes etc. Faculty members of ME have received grants from governmental and nongovernmental organizations for student projects as PI. The faculty member recognized as research guide under APJ Abdul Kalam Technological University from 2020 is detailed below.
Research Guides
Dr. K. Shunmugesh
| LIST OF PAPERS INDEXED IN SCOPUS DATABASE & CONFERENCE PROCEEDINGS WITH ISBN/ISSN |
|---|
| S. Aravind and S. S. Hiremath, “Modelling of Micro-Electrochemical machining parameters used for machining of holes on copper plate,” Journal Indian Chemical Society, vol. 100,no. 3, p. 100933, 2023, doi: 10.1016/j.jics.2023.100933. |
| Arun Raphel. Kumaran P. Vivekanandhan, S., “Green energy harvesting using high entropy thermoelectric alloys,” in Computational Intelligence based Optimization of Manufacturing Process for Sustainable Materials, CRC Press, 2023. |
| L. Bhanuprakash, N. Manikandan, Arun Raphel, and G. S. Mangalathu, “Experimental investigation on mechanical properties of Kenaf fibre reinforced epoxy composites with annona squamosa powder,” Proceedings of Materials Today, June 2023, doi: 10.1016/j.matpr.2023.06.247. |
| Arun. Raphel, P. Vivekanandhan, A. K. Rajasekaran, and S. Kumaran, “Tuning Thermoelectric figure of merit in Ag doped nanostructured PbSnTeSe alloy by entropy and band engineering phenomena,” Materials Today Communications, vol. 35, p. 105880, June 2023, doi: 10.1016/j.mtcomm.2023.105880. |
| K. Shunmugesh, Arun Raphel, T. G. Unnikrishnan, and K. T. Akhil, “Finite element modelling of Carbon fiber reinforced with vespel and honey-comb structure,” Proceedings of Materials Today, vol. 72, pp. 2163–2168, January 2023, doi: 10.1016/j.matpr.2022.08.301. |
| N. S. Ross, A. Paul Savio, “Novel use of cryogenic cooling conditions in improving the machining performance of Al 8011 / nano ‐ SiC composites,” International Journal Advertising Manufacturing Technology, no. 0123456789, 2023, doi: 10.1007/s00170-023-12382-1. |
| M. Sundeep, K. Limbadri, N. Manikandan, A. Paul Savio, and J. Joseph, “Study of mechanical properties of pineapple leaf fiber and E-glass fiber reinforced hybrid epoxy matrix composite materials,” Proceedings of Materials Today, no. 22, 2023, doi: 10.1016/j.matpr.2023.06.319. |
| M. Venkateswar Reddy, B. Hemasunder, P. Mahadevapa Chavan, N. Dish, and A. Paul Savio, “Study on the significance of process parameters in improvising the tensile strength of FDM printed carbon fibre reinforced PLA,” Proceedings of Materials Today, no. 21, 2023, doi: 10.1016/j.matpr.2023.06.330. |
| L. Paul, A. Ramachandran, and A. Joy, “GA based approach for process optimisation in modified AJM process with dust absorption,” Proceedings of Materials Today, no. 20, pp. 9–12, September 2023, doi: 10.1016/j.matpr.2023.09.048. |
| Padmakumar A, Madhavan AP, Joseph J, K Shunmugesh., “Transient Thermal Analysis on Rotary Friction Welding of 15CDV6 Aerospace Steel,” Transactions of the Indian Institute of Metals, March 2023 , 76(3), 799-808, ISSN 0972-2815, https://doi.org/10.1007/s12666-022-02759-3. |
| Muthuswamy P, Shunmugesh K., “Artificial intelligence-based tool condition monitoring for digital twins and industry 4.0 applications,” International Journal on Interactive Design and Manufacturing (IJIDeM), June 2023, vol. 17, no. 3, pp:1067-87, ISSN 1955-2513, https://doi.org/10.1007/s12008-022-01050-5. |
| Tamilarasan A, Renugambal A, Shunmugesh K., “Multi-performance optimization for AWJ drilling process in cutting of ceramic tile: BBD with EOBL-GOA algorithm,” Multidiscipline Modeling in Materials and Structures, September 2023, vol. 13, ISSN 1573-6105, https://doi.org/10.1108/MMMS-11-2022-0254. |
| Amel Austine, R. Suji Pramila, (2023) Sum Rate Maximization and Consistency in D2D Communication Based on ACO and Game Theory, International Journal of Electrical and Computer Engineering Systems, September 2023, vol. 14, issue 7, pp: 743-751, DOI: https://doi.org/10.32985/ijeces.14.7.2 |
| L. Varghese, M. Kailathuvalappil Kochunny, and J. George, “Study of discharge characteristics andmulti objective optimization of machining parameters in ultrasonic vibration assisted microelectrical discharge machining,” Proceedings of Institution Mechanical Engineering, Part C Journal of Mechanical Engineering Sciences, p.09544062231168775, May 2023, doi: 10.1177/09544062231168775. |
| L. Varghese, J. George, and K. K. Manesh, “Plasma Characterization in Ultrasonic Vibration-Assisted Micro-Electrical Discharge Machining (μ-EDM),” in Advances in Micro and Nano Manufacturing and Surface Engineering, B. Bhattacharyya, J. Mathew, N. Saravanakumar, and G. Rajeshkumar, Eds., Singapore: Springer Nature Singapore, 2023, pp. 13–21. |
| Dr.Sarika S, Kesiya Johnson, “Digital Signature in Income Tax Return Filing”, Kanpur Philosophers, special issue IV, May 2023, ISSN 2348-8301. |
| Amel Austine, R. Suji Pramila, "Hybrid Optimization Algorithm for Resource Allocation in LTE-Based D2D Communication", Computer Systems Science & Engineering, vol. 46, issue 2, pp: 2263-2276, Feb 2023, DOI: https://doi.org/10.32604/csse.2023.032323. |
| Amel Austine, R. Suji Pramila, (2023), Optimization-assisted Resource Exchange Framework for Device-to-Device Communication in LTE-Advanced System”, International Journal of Intelligent Engineering and Systems, August 2023, vol. 12, no. 5, pp:406-415, DOI: https://doi.org/10.22266/ijies2023.1031.35 |
| Ierin Babu, and R Mathusoothana S. Kumar, “Evolutionary Algorithm Based Feature Subset Selection for Students Academic Performance Analysis”, Intelligent Automation and Soft Computing, SCI, vol. 36, issue 3, 2023, ISSN 3621-3636. DOI:10.32604/iasc.2023.033791 |
| Augustine T., Roy S, Sahaya V J, Jain M T, Shanmugam P., “Topological study on degree based molecular descriptors of fullerene cages”, Molecular Physics, 2023 121:4, DOI: 10.1080/00268976.2023.2179858 |
| T. Augustine and R. Santiago, “On Neighborhood Degree-Based Topological Analysis over Melamine-Based TriCF Structure,” Symmetry, vol. 15, no. 3, pp:635-640, March 2023, doi: 10.3390/sym15030635. |
| Augustine, T.; Vijay, J.S.; Roy, S.; Beromeo, B.C.; Husin, M.N.; Gobithaasan, R.U.; Easuraja, M., “Topological Properties and Entropy Calculations of Aluminophosphates,” Mathematics, vol. 11, no. 11, pp:244-253, May 2023, doi: 10.3390/math11112443. |
| Augustine, T., Roy, S., Govardhan, S. and Prabhu, S., “Determination of degree based molecular descriptors of superphenalene and supertriphenylene through MPolynomial”, European Chemical Bulletin, 2023, vol. 12, no. 5, pp:4765-4777. |
| Augustine. T, S. Roy, “Radio Labeling of Certain Networks” Palestine Journal of Mathematics, 2023, vol. 12, no. 1, pp:75-80. |
| Nalla Rakesh Kumar, Palanisamy T., Basil Baby, “Effect of ICP and ECP on performance of cement based battery system- An experimental investigation”, Proceedings of Materials Today, Science Direct, August 2023, ISSN: 2214-7853, https://www.materialstoday.com/proceedings. |
| E. B. Pukkunnen, Neena M. Joseph, B. M. Jos, M. C. Joy and K.A. Eldhose, “Performance investigation and energy optimization in hybrid electric vehicle model using Reinforcement Learning and Fuzzy Controller”, International Journal of Vehicle Performance, 2023, vol. 9, no. 1, pp:73-90 ISSN: 1745-3194. https://doi.org/10.1504/IJVP.128039. |
| K K Rajan, “Technologies and measures to realize adequate Carbon - free energy in the country: An overview , B scan,” vol. 7, no.2, July 2022, pp:7-15. |
| Jinta J., Bobin G., Rajesh K. T., “Soft Directed Graphs, Their Vertex Degrees, Associated Matrices, and Some Product Operations”, In New Mathematics and Natural Computation Journal, 2022, ISSN 1793-0057, DOI: https://doi.org/10.1142/S179300572350028X. |
| Jinta J., Bobin G., Rajesh K. T., “Soft Directed Graphs, Some of Their Operations and Properties”, In New Mathematics and Natural Computation Journal, 2022, ISSN 1793- 0057, DOI: https://doi.org/10.1142/S1793005724500091. |
| Bobin G., Jinta J., Rajesh K. T., “Modular Product of Soft Directed Graphs”, In TWMS Journal of Applied and Engineering Mathematics Journal, 2022, ISSN 2146-1147. |
| Jinta J., Bobin G., Rajesh K. T., “Homomorphic Product of Soft Directed Graphs”, In TWMS Journal of Applied and Engineering Mathematics Journal, 2022, ISSN 2146-1147. |
| Mathew Anita Brigit, "Detect and Prevent Phising Websites using Machine Learning Techniques," Annals of Data Science, June 2022, pp: 1-26, ISSN: 2198-5804. |
| Arun Raphel, V. P, A. K. Rajasekaran, and K. S, “Tuning figure of merit in Na doped nanocrystalline PbSnTeSe high entropy alloy via band engineering,” Materials Science in Semiconductor Processing, vol. 138, pp:106-270, February 2022, doi: 10.1016/j.mssp.2021.106270. |
| Neena M. Joseph, M.V.L.R. Anjaneyulu and Harikrishna. M, “Operating speed prediction of vehicles at combined curves using mixed effect modeling approach”, Recent Advances in Transportation Systems Engineering and Management. Proceedings of CTSEM 2022. E book chapter: Lecture Notes in Civil Engineering. LNCE, vol. 261, springer. https://trid.trb.org/view/2113385. |
| Jinta J., Bobin G., Rajesh K. T., “Connectedness and Some Measurements in Soft Directed Graphs”, In Southeast Asian Bulletin of Mathematics Journal, ISSN 2146-1147. |
| Jinta J., Bobin G., Rajesh K. T., "Rooted Product and Restricted Rooted Product of Soft Directed Graphs," In New Mathematics and Natural Computation Journal, February 2022, ISSN 1793-0057, DOI: https://doi.org/10.1142/S1793005724500194. |
| Ayer, Bharti, Dara, Vijaya Lakshmi, AB Mathew, M. Saradha, and R. Karthik. "An efficient management education in developing women entrepreneurial aspirations," International Journal of System Assurance Engineering and Management,August 2022, pp: 1-12, ISSN: 0976-4348. |
| S. Aravind and S. S. Hiremath, “Machining of holes on SS316L with solid and hollow tool electrodes,” Materials of Manufacture Processing, vol. 37, no. 16, pp:1859-1870, 2022, doi: 10.1080/10426914.2022.2065010. |
| S. Aravind and S. S. Hiremath, “Machining and characterization of holes machined on a biomaterial Ti-6Al-4V ELI using an indigenously developed electrochemical machining cell with IEG control mechanism,” Machine Science Technology Journal, vol. 26, no. 3, pp:486–513, 2022, doi: 10.1080/10910344.2022.2129985. |
| S. Aravind and S. S. Hiremath, “Design and Development of IEG Control and Characterization of Micro-holes Generated Using In-house Developed μ-ECM Setup,” Arabic Journal of Science and Engineering, vol. 47, no. 7, pp:8877–8898, 2022, doi: 10.1007/s13369-021-06392-y. |
| T. Augustine and S. Roy, “Topological Study on Triazine-Based Covalent-Organic Frameworks,” Symmetry, vol. 14, no. 8, pp:1590-1595, August 2022, doi: 10.3390/sym14081590. |
| George, S., Kumar, P.P.A. “Indicator-based assessment of capacity development for disaster preparedness in the Indian context”, Environment System Decision Journal, vol. 42, pp:417–435, 2022. https://doi.org/10.1007/s10669-022-09856-0. |
| Baby, B., Palanisamy, T., Arjun, S, “Review of Various Microbial Immobilization Methods Towards Self-healing Applicatio”, Proceedings of SECON'22, Lecture Notes in Civil Engineering, Springer,vol. 284, https://doi.org/10.1007/978-3-031-12011-4_47 |
| Akshay, J.P., Baby, B., Palanisamy, T, "Experimental Study on Durability and Mechanical-Properties of Lightweight Mortar with Encapsulated Spore Forming Bacteria," In Proceedings of SECON'22, Lecture Notes in Civil Engineering, Springer, vol. 284, https://doi.org/10.1007/978-3-031-12011-4_98 |
| Dr.Sarika S, “An Approach to Perceive Session Hijacking in IoT Healthcare”, Lecture Notes on Network and Systems, vol. 401, chapter 51, June 2022, ISSN: 2367-3389. https://doi.org/10.1007/978-981-19-0098-3_51 (Book Chapter) |
| Dr.Sarika S, Kesiya Johnson, “Digital Signature in ITR filing”, International Journal of Advanced Research in Science, Communication, and Technology, vol. 2, issue 3, June 2022, ISSN:2581-9429. |
| Harigovind S, Shunmugesh K. "Multi response optimization and regression analysis of milling parameters of jute fibre reinforced epoxy composite," Proceedings of Materials Today, September 2022, vol. 72, pp:2169-2173, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2022.08.344. |
| Mathew S, Shunmugesh K. "Application of grey-fuzzy logic for the optimization of drilling parameters for coir fibre reinforced composite,"Proceedings of Materials Today, August 2022, vol. 72, pp:2082-2088, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2022.08.144. |
| Shunmugesh K, Raphel A, Unnikrishnan TG, Akhil KT, "Finite element modelling of carbon fiber reinforced with vespel and honey-comb structure," Proceedings of Materials Today, August 2022, vol. 72, pp:2163-2168, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2022.08.301 |
|
K.K. Rajan, B. Aruna, S. Anju, P.R. Pedada, S. Verma, R. Bhattacharyay |
| George, Anju Susan, and A. Shajin Nargunam. "Multi-Replica Integrity Verification in Cloud: A Review and A Comparative Study." In 2021 International Conference on Communication, Control and Information Sciences (ICCISc), vol. 1, pp:1-5. IEEE, 2021. |
| Juliet A Murali, “An Advanced Hierarchical Virtual Resource Management Model in Cloud Data Centres,” in Second International Conference on Emerging Trends in Materials, Computing and Communication Technologies ‘ICETMCCT, vol. 9, December 2021. |
| George, Anju Susan, and A. Shajin Nargunam. "Improved multi‐party verification protocol with reduced computational overhead in cloud storage system." Concurrency and Computation: Practice and Experience 33, vol. 33, no.21, pp: 6427-6433, November 2021, ISSN: 1532 – 0626 |
| George, Anju Susan, and A. Shajin Nargunam. "Remote cloud data auditing protocols: A comprehensive analysis and comparative study." In 2021 5th International Conference on Intelligent Computing and Control Systems (ICICCS), pp:64-70. IEEE, 2021. |
| Sheela, V. K., A. Nedumaran, P. Vidhya Saraswathi, and P. Karthika. "Performance Analysis of Stego-Image Security in Machine Learning." In 2021 Third International Conference on Intelligent Communication Technologies and Virtual Mobile Networks (ICICV), pp:676-678. IEEE, 2021. |
| Neenu Daniel, A. Anitha, “Texture and quality Analysis for Face Spoofing Detection”, Computers and Electrical Engineering, SCI, vol. 94, issue 1, pp:1-11, 2021. |
| L. Varghese, P. Vysakh, and K. K. Manesh, “A multiphysics model of micro- EDM plasma in de-ionizedwater,” presented at the INTERNATIONAL CONFERENCE ON COMPUTATIONAL SCIENCES-MODELLING, COMPUTING AND SOFT COMPUTING (CSMCS 2020), Kozhikode, India, 2021, p:3-9, doi: 10.1063/5.0045730. |
|
L. Varghese, P. Vysakh, and K. K. Manesh, "Numerical analysis and simulation of micro-EDM plasma in de-ionised water," IOP Conference Server Materials of Science in Engineering, vol. 11, no. 1, pp: 12-22, March 2021, doi: 10.1088/1757-899X/1114/1/012056. |
| Baby, Diana, Sujitha Juliet Devaraj, and Jude Hemanth. "Leukocyte classification based on feature selection using extra trees classifier: Atransfer learning approach." Turkish Journal of Electrical Engineering and Computer Sciences, vol. 29, no. 8, 2021, ISSN:2742-2757. |
| Arun Raphel, A. K. Singh, P. Vivekanandhan, and S. Kumaran, “Thermoelectric performance of nanostructured PbSnTeSe high entropy thermoelectric alloy synthesized via spark plasma sintering,” Physica B: Condensed Matter, vol. 622, pp: 413-419, December 2021, doi: 10.1016/j.physb.2021.413319. |
| Arun Raphel, V. P, A. K. Singh, and K. S, “High entropy stabilization and band engineering driven high figure of merit in nanostructured PbSn0.875TeSeBi0.125 alloy,” Journal of Solid State Chemistry, vol. 303, pp: 122531, November 2021, doi: 10.1016/j.jssc.2021.122531. |
| K. Shunmugesh, K. R. Arun, Arun Raphel, and K. T. Akhil, “Optimization of Drilling Parameters of Glass Fiber-Reinforced Polymers Using Grey Relational Analysis,” in Recent Advances in Mechanical Engineering Lecture Notes, Springer, 2021, pp: 319, doi: 10.1007/978-981-15-8704-7_40. |
| Akhil KT, Arul S, Shunmugesh K., “Optimization of Cryogenic Turning Process Parameters Using Grey Relational Analysis (GRA) in Super-Duplex Stainless Steel (A479),” In Recent Advances in Mechanical Engineering, 2021, pp: 307-312, Springer, ISBN 978-981-15-8703-0, https://doi.org/ 10.1007/978-981-15-8704-7_38. |
| Varghese, B.M., Paul, B. and Shunmugesh, K., “Optimization of process parameters of machining in coir fiber reinforced epoxy composites,” Materials Today: Proceedings, March 2021, no. 13, pp: 3880-3886, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2020.12.1183. |
| Rajendran A, Paul B, Shunmugesh K., “Optimization of milling parameters in jute fibre reinforced epoxy composite using GRA,” Materials Today: Proceedings, March 2021, no.13, pp: 3951-3955, ISSN 2214-7853, https://doi.org/10.1016/j.matpr.2021.02.663. |
| Dr. Sony Kurian, "Identification of Malicious code variants using Spp-Net model and color images," 15th IEEE international conference on industrial and information systems (ICIIS-2020),November 2020, pp: 12-20 |
| Mr. Arun Raphel, "High entropy stabilization and band engineering driven high figure of merit in nanostructured PbSn0.875TeSeBi0.125 alloy", Journal of solid state Chemistry, 2021 |
| Mr. Arun Raphel, "Thermoelectric performance of nanostructured PbSnTeSe high entropy thermoelectric alloy synthesized via spark plasma sintering", Physica B: Condensed Matter, 2021 |
| Mr. Arun Raphel, "Tuning figure of merit in Na doped nanocrystalline PbSnTeSe high entropy alloy via band Engineering", Material Science Semiconducor Processing, 2021 |
| Mrs. Shine George, "Critical indicators for assessment of capacity development for disaster preparedness in a pandemic context", International Journal of Disaster Risk Reduction, 2021 |
| George, Shine, and PP Anil Kumar. "Indicator-based assessment of capacity development for disaster preparedness in the Indian context." Environment Systems and Decisions, vol. 42, no. 3, 2022, pp: 417-435. |
| Joseph, Neena M., M. Harikrishna, and M. V. L. R. Anjaneyulu. "Safety evaluation of multiple horizontal curves using statistical models." International journal of vehicle safety, vol. 12, no. 1, 2021, pp: 81-97. |
| Baby, Diana, Sujitha Juliet Devaraj, and Jude Hemanth, “Leukocyte classification based on feature selection using extra trees classifier: a transfer learning approach”, Turkish Journal of Electrical Engineering & Computer Sciences(SCIE), 2021 |
| Baby, Diana, and Sujitha Juliet Devaraj, "Leukocyte Classification based on Transfer Learning of VGG16 Features by K-Nearest Neighbour Classifier", IEEE Xplore, 2021 |
| Baby, Diana, Sujitha Juliet Devaraj, and MM Anishin Raj, "Leukocyte classification based on statistical measures of radon transform for monitoring health condition", Biomedical Physics and Engineering Express, 2021. (ESCI and SCOPUS), 2021 |
| Ms. Neenu Daniel, "Texture and quality analysis for face spoofing detection", Computers and Electrical Engineering, 2021 |
| Ms. Anju Susan George, "Multi-Replica Integrity Verification in Cloud: A Review and a Comparative Study", IEEE Explore Digital Library, 2021 |
| Ms. Anju Susan George, "Remote Cloud Data Auditing Protocols: A Comprehensive Analysis and Comparative Study", Proceedings of 5th International Conference on Intelligent Computing and Control Systems , 2021 |
| K. Shunmugesh, K. R. Arun, Arun Raphel, and K. T. Akhil , "Optimization of Drilling Parameters of Glass Fiber-Reinforced Polymers Using Grey Relational Analysis:", Lecture Notes in Mechanical Engineering, Springer Nature, 2021, pp: 319-324 |
| Akhil, K.T, Arul, S, Shunmugesh K. "Optimization of Cryogenic Turning Process Parameters Using Grey Relational Analysis (GRA) in Super-Duplex Stainless Steel (A479)", Lecture Notes in Mechanical Engineering, 2021, pp: 307-312 |
| Anju Susan George, A Shajin Nargunam, "Improved multi-party verification protocol with reduced computational overhead in cloud storage system", Concurrency Computat Practice and Experience. 2021, pp: 1532-0634 |
| George Shine and P. P. Anilkumar. "CRITICAL indicators for assessment of capacity development for disaster preparedness in a pandemic context." International Journal of Disaster Risk Reduction, vol. 55, 2021, pp: 102077. |
| Naveen Jacob, Muralidhar Kulkarni, Krishnamoorthy K, "An Electronically Switchable UWB to Narrow Band Antenna for Cognitive Radio Applications", Microwave and Optical Technology Letters, 2020, pp: 1098-2760 |
| Arun Raphel, P. Vivekanandhan, S. Kumaran, "High entropy phenomena induced low thermal conductivity in BiSbTe1.5Se1.5 thermoelectric alloy through mechanical alloying and spark plasma sintering", Material Letters, 2020, pp: 2454-4051 |
| V. Venkatesh,Anishin Raj M M , K. Sajith, R. Anushiadevi, T. Praba, "A precision-based diagnostic model ADOBE-accurate detection of breast cancer using logistic regression approach", Journal of Intelligent and Fuzzy Systems, 2020, pp: 1064-1246 |
| K. Arun , C. Ramesh Kannan , B. Stalin, "The effect of cryogenically treated drilling tool on GFRP composite drilling holes-A comparative study", Materials Today: Proceedings, 2020, pp: 2214-7853 |
| Shibu K.R,Suji Pramila , "A novel secret key generation scheme for manets using traffic load to avoid active attackers", International Journal of Emerging Trends in Engineering Research, 2020, pp: 2347 - 3983 |
| Arun.K, Ramesh Kannan.C ,Milon Selvam Dennison, "Fabrication Of GFRP Composite And To Analyse Its Delamination Factor In Drilling Using Three Different Tool Geometries", International Journal of Scientific and Technology research , 2020, pp: 2277-8616 |
| Karthikeyan B,Anishin Raj M.M, D Yuvaraj,K. Joseph Abraham Sundar, "A hybrid approach for video steganography by stretching the secret data", Lecture Notes in Networks and Systems, 2020, pp: 2367-3370 |
| Sreeraj M,Jestin Joy, Alphonsa Kuriakose, Sujith M R, Vishnu P K, Haritha Unni, "CLadron :AI assisted device for identifying artificially ripened climacteric fruits", Procedia Computer Science , 2020, pp: 1877-0509 |
| Sreeraj M,Jestin Joy,Alphonsa Kuriakose ,Bhameesh M B,Anoop K Babu, Merin Kunjumon, "VIZIYON: Assistive handheld device for visually challenged", Procedia Computer Science, 2020, pp: 1877-0509 |
| Naveen Jacob, Muralidhar Kulkarni ,Krishnamoorthy K., "Omega Shaped Complementary Split Ring Resonator Loaded Bandwidth Reconfigurable Antenna for Cognitive Radio Applications", Procedia Computer Science, 2020, pp: 1877-0509 |
| Basil Baby, Serin Sara Roy, Emmanuel Jose, "Characteristics of Green Concrete with Perlite as a Partial Replacement of Fine Aggregate", Proceedings of the Annual International Conference on Emerging Research Areas, 2020, |
| Diana Baby ,Sujitha Juliet Devaraj, Anishin Raj M. M., "Leukocyte sub type identification using spline interpolation and graphical analysis", International Journal of Advanced Trends in Computer Science and Engineering, 2020, pp: 2278-3091 |
| K.Shunmugesh Amal Pratheesh, "Taguchi Grey Relational Analysis based Optimization of Micro-Drilling Parameters on Carbon Fiber Reinforced Plastics", Materials Today: Proceedings , 2020, pp: 2214-7853 |
| K.S.Vishnu P.A.Anuroop Linto P.Anto Lovely Mathew K.Shunmugesh, "Areca fiber reinforced LLDPE biocomposite", Materials Today: Proceedings, 2020, pp: 2214-7853 |
| Melbin George Joseph Josemon Shaji Mathew Francis ArjunRaghavan K.Shunmugesh, "Measurement of Tensile Properties and Hardness of Friction Stir Welded Aluminium Alloy AA1200", Materials Today: Proceedings, 2020, pp: 2214-7853 |
| Soorya Shaji, M Sreeraj, Jestin Joy, Alphonsa Kuriakose , "On Computer-Aided Diagnosis of Breast Cancers Using Nuclear Atypia Scoring", Proceedings of ComNet19, 2020, pp: 1876-1100 |
| Diana Baby , Sujitha Juliet Devaraj,Soumya Mathew,Anishin Raj M.M, "A Performance Comparison of Supervised and Unsupervised Image Segmentation Methods", Proceedings of ICACI-2019: Springer Nature Computer Science (Advances in Computational Approaches for Artificial Intelligence, Image Processing, IoT a nd Cloud Applications-Topical collection), 2020, pp: 2662-8907 |
| Juliet A Murali, "An Enhanced Hierarchical Model For Cloud Computing Environments", Proceedings of ACCESS'20, 2020, pp: 978-81 |
| Neenu Daniel, A.Anitha, "A Study on Recent Trends in Face Spoofing Detection Techniques", proceedings of 3rd IEEE International Conference on Inventive Computation Technologies, 2020, pp: 978-1000 |
| Nelson Mathew, Sebin Joseph and Cyriac Joseph, "An Empirical Analysis on Investment Behavior among working Women: Are Women Taking the right Investment Decisions for their Future?", Proceedings 4th International marketing conference IIM K, December 7th to 9th, 2020, ISBN: 978-93-5419-748-2 |
| Ranjini Surendran, DJ Hemanth, "Scene Understanding Using Deep Neural Networks— Objects, Actions, and Events: A Review", Proceedings of the International Conference on Innovative Computing and Communications , 2020, pp: 978-981 |
| K K Rajan, "A study on sodium - the fast breeder reactor coolant", IOP Conference Series: Materials Science and Engineering, 2020, 1757-8999 |
| K K Rajan , B Aruna, "Performance evaluation of a 200 kWp grid tied solar power plant", IOP Conference Series: Materials Science and Engineering, 2020, pp: 1757-8999 |
| Neena M. Joseph, M. Harikrishna, M.V.L.R. Anjaneyulu, "Safety evaluation of multiple horizontal curves using statistical models", International Journal of Vehicle Safety, 2020, pp: 1479-3113 |
| Melvin C Jose,Radha Sankararajan,Sreeja B.S,Pratap Kumar, "Laser micro-machined 28 GHz broad band single feed microstrip antenna for 5G mm-wave applications", Circuit World, 2019, pp: 0305-6120 |
| Tony D,Sarin P, Neeraj K. Pushkaran, Nelson J, Mohanan Pezholil, Vasudevan, "Artificial Dielectric Superstrate Loaded Antenna for Enhanced Radiation Performance", PIER M, 2019, pp: 1937-8726 |
| M. Karthikeyan, M. P. Jenarthanan, R. Giridharan , K. Shunmugesh, Investigation on Crash Analysis of a Frontal Car Bumper, Transactions of the Indian Institute of Metals., 2019, 0975-1645 |
| Shunmugesh, K. Lakshmikanth, G. Lawrance, C.A. Anantha Raman, L., An optimization of micro-drilling parameters in carbon fiber reinforced polymer using grey relation analysis, International Journal of Mechanical and Production Engineering Research and Development, 2019, 2249-8001 |
| Tintu Shine A.L,Fincy Babu,Dhileep M., Mesoscopic analysis of reinforced concrete beams, Coupled Systems Mechanics, 2019, 2234-2192 |
| Karthikeyan B, Venkata Keerthy S, Hariharan G, Secure Gray Code Based Reversible Data Hiding Scheme in Radiographic Images, International Journal of Electronic Security and Digital Forensics , 2019, 1751-911X |
| Andrews Jose, Sujitha Juliet Devaraj, Recent advances and investigation of efficient Computer Aided Diagnosis systems for CT images in Liver cancer detection, International Journal of Advanced Trends in Computer Science and Engineering, 2019, 2278-3091 |
| Elizabeth M J, Jobin Jose, Dona Jose, A Fog Based Security Model For Electronic Medical Records In the Cloud Database, International Journal of Innovative Technology and Exploring Engineering, 2019, 2278-3075 |
| Shibu K.R,Suji Pramila R, Random Bit Extraction for Secret Key Generation in MANETs, Wireless Personal Communications, 2019, 1572-834X |
| Vinoj K, Dr. R Raja, Friction Stir Welding on Dissimilar Alloys - A Critical Review, International Journal of Mechanical Engineering and Technology, 2019, 0976-6359 |
| Basil Joy, K. Shunmugesh, M.Pramod Kumar, K.Arun, Optimization in Turning of 11sMn30 Through Process Capability Index, Materials Today: Proceedings (Elsevier), 2019, 2214-7853 |
| K. Shunmugesh, E.K.M. Yaser, Multi-objective optimization of milling process parameters in glass fibre reinforced polymer via grey relational analysis and desirability function, Materials Today: Proceedings (Elsevier), 2019, 2214-7853 |
| K. Shunmugesh, Jaison Baby, Optimization of Glass Fiber Reinforced Polymer (GFRP) using Multi Objective Taguchi function and TOPSIS, Materials Today: Proceedings (Elsevier), 2019, 2214-7853 |
| Basil Baby,Daniel A.V,Emmanuel Jose,P.P Gokul,Naveen John,Sachin saju, Experimental Investigation on PCE and SNF Type Admixture on Early Age Strength of M40 Grade Green Concrete, Proceedings of SECON'19, 2019, 978-3-030-26365-2 |
| K.K. Rajan, Aruna B., A Review on Flow Measurement in Sodium Cooled Fast Reactor Circuits, Proceedings of 2019 3rd IEEE International Conference on Electrical, Computer and Communication Technologies, ICECCT, 2019, 978-1-5386-8158-9 |
| Rajan, K.K., Verma, S., Aruna, B., Anju, S., Bhattacharyay, R., Development of Level Sensor for Lead - Lithium Loop System, Proceedings of 2019 3rd IEEE International Conference on Electrical, Computer and Communication Technologies, ICECCT, 2019, 978-1-5386-8158-9 |
| Simi Zerine Sleeba, J Jose, M Palesi , Traffic Aware Deflection Rerouting Mechanism for Mesh Network on Chip, Proceedings of 2018 IEEE/IFIP International Conference on VLSI and System-on-Chip, VLSI-SoC, 2019, 978-1-5386-4756-1 2324-8440 |
| RG Kunthara, RK James,Simi Zerine Sleeba, ReDC: Reduced Deflection CHIPPER Router for Bufferless NoCs, Proceedings of the 2018 8th International Symposium on Embedded Computing and System Design, ISED 2018, 2019, 978-1-5386-6575-6 2473-9413 |
| RG Kunthara, RK James,Simi Zerine Sleeba, 2L-2D Routing for Buffered Mesh Network-on-Chip, Proceedings of the International Symposium on VLSI Design and Test, 2019, 978-981-32-9767-8 |
| E Nandhini, BS Sreeja,Melvin C Jose , Implementation of Aperture coupled Stacked layer Microstrip Patch Antennas for 5G Wireless Communication Systems, Proceedings - International Conference on Vision Towards Emerging Trends in Communication and Networking, ViTECoN 2019, 2019, 978-1-5386-9353-7 |
| Melvin C Jose, S Radha, BS Sreeja, Design of 28 GHz High Gain 5G MIMO Antenna Array System, Proceedings of TENCON 2019 - 2019 IEEE Region 10 Conference (TENCON), 2019, 978-1-7281-1895-6 |
| Naveen Jacob, Muralidhar Kulkarni & Krishnamoorthi K., A Compact Frequency Reconfigurable Antenna for Cognitive Radio Applications, Proceedings of International Engineering Symposium (IES-2019), Kumamoto University, Japan, 2019, Nil |
| Joby George and V. Madhusudanan Pillai , A study of factors affecting supply chain performance, Journal of Physics Conference Series website, 2019, 1742-6596 |
| Madathinal Kunjappan Aswathi, Moothetty Padmanabhan, Lovely Mathew, Prosenjit Saha, Roberto Terzano, Nandakumar Kalarikkal, Tatiana Volova, Sabu Thomas, Carbon nanotube reinforced poly(trimethylene terephthalate) nanocomposites: Viscoelastic properties and chain confinement, Polymer Engineering & Science, 2018, 1548-2634 |
| K. Shunmugesh, K. Panneerselvam, Multi-performance optimization of micro-drilling using Taguchi technique based on membership function, IJEMS, 2018, 0975-1017 |
| Ajitha A R, Aswathi M K, Geethamma V G, Lovely Mathew,Sabu Thomas, Effect of MWCNTs on Wetting and Thermal Properties of an Immiscible Polymer Blend, Macromolecular Symposia, 2018, 1521-3900 |
| Ajitha A R, Aswathi M K, Lovely Mathew,Sabu Thomas, Selective Localization of MWCNT in Poly (Trimethylene Terephthalate)/Poly Ethylene Blends: Theoretical Analysis, Morphology, and Mechanical Properties, Macromolecular Symposia, 2018, 1521-3900 |
| Sinnu Susan Thomas,Sumana Gupta,Venkatesh K Subramanian, Event Detection on Roads Using Perceptual Video Summarization, IEEE Transactions on Intelligent Transportation Systems,, 2018, 1558-0016 |
| Easwaran Nampoothiry, Nibin B, Rijo J Thomas, Thermodynamic Analysis of an integrated Gas Turbine Powerplant utilising cold exergy of LNG, Journal of Mechanical Engineering and Sciences, 2018, 2289-4656 |
| Melvin C Jose,Chithra Devi,Sreeja B.S,S.Meraline, A novel wideband pattern reconfigurable antenna using switchable parasitic stubs, Microwave and Optical Technology Letters, 2018, 0895-2477 |
| Basil Baby,Suji Pramila R, Survey on analysis of energy optimization in MANET routing, International Journal of Engineering & Technology, 2018, 2227-524X |
| Arunkumar S, Subramaniyaswamy V, Karthikeyan B, Saravanan P, Logesh R, Meta-data based secret image sharing application for different sized biomedical images, Biomedical Research, Special Issue: Artificial Intelligent Techniques for Bio Medical Signal Processing , 2018, 0970-938X |
| Sheela.V.K, Dr.S.SureshBabu, Brain tumour Detection based on FFT , Curve analysis , k-space and Neural network classifier, International Journal of Signal and Imaging Systems Engineering, 2018, 1748-0701 |
| K. Shunmugesh, K. Panneerselvam, Multi-performance Optimization of Drilling Carbon Fiber Reinforced Polymer Using Taguchi: Membership Function, Transactions of the Indian Institute of Metals., 2018, 0975-1645 |
| Diana Baby, Sujitha Juliet Devaraj, Feature extraction techniques for leukocyte classification - A review, International Journal of Engineering and Technology(UAE), 2018, 2227-524X |
| M. P. Jenarthanan, S. Jeyaraj , K. Shunmugesh , Experimental Investigation on Electro-codeposition Nickel-Weld Slag Composite Coating, Transactions of the Indian Institute of Metals., 2018, 0975-1645 |
| Ajitha A R, Aswathi M K, Lovely Mathew,Sabu Thomas, Carbon Nanotubes: An Ideal Candidate for Biomedical Applications, JSM Nanotechnology & Nanomedicine, 2018, 2334-1815 |
| Aswathi M K , Ajitha A R , Akhina H , Lovely P. Mathew , ,Sabu Thomas, Quantum Dots: A Promising Tool for Biomedical application, JSM Nanotechnology & Nanomedicine, 2018, 2334-1815 |
| simi zerine sleeba ,M.G Mini,John Jose, Energy-efficient fault tolerant technique for deflection routers in two-dimensional mesh Network-on-Chips, IET Computers and Digital Techniques, 2018, 1751-8601 |
| Aswathi M K , Geethamma V.G ,Lovely P. Mathew ,Sabu Thomas,Prosenjit Saha, Tuning of microstructure in engineered poly (trimethylene terephthalate) based blends with nano inclusion as multifunctional additive, Polymer Testing, 2018, 0142-9418 |
| KT Akhil, Sanjivi Arul, Optimization of Squeeze Casting Process Parameters Using Taguchi in LM13 Matrix B4C Reinforced Composites, IOP Conference Series: Materials Science and Engineering, 2018, 1757-899X |
| Sajan T John, Sridharan, R., Ram Kumar, P. N. and Krishnamoorthy, M., Multi-period reverse logistics network design for used refrigerators, Applied Mathematical Modelling, Vol. 54, 311-331, 2018, 0307-904X |
| Shibu K.R,Suji Pramila R, Routing protocol based key management schemes in manet: A survey, International Journal of Engineering and Technology(UAE), 2018, 2227-524X |
| Sajan T John, Sridharan, R., and Ram Kumar, P. N. , Reverse logistics network design: a case of mobile phones and digital cameras, International Journal of Advanced Manufacturing Technology, 2018, 1433-3015 |
| Amel Austine, R. Suji Pramila, "A Review on Recent Research Directions in Device to Device Communication", Proceedings of 3rd IEEE International Conference on Inventive Computation Technologies (ICICT) 2018, pp: 978-1-5386-4985-5 |
| Cyriac M odackal,A.O Lindo,C.K. Aanandan,Thomaskutty Matthew, Backscattereing reduction of dihedreal corner reflector with metallo-dielectric structure based on sierpinsky carpet array, IEEE Proceedings of the Progress in Electromagnetics Research Symposium - Fall (PIERS - FALL), 2018, 978-1-5386-1211-8 |
| K.K. Rajan, A Review of Recent Advancements in Nuclear Power Generation, IEEE Proceedings of the International Conference on Control, Power, Communication and Computing Technologies, 2018, 978-1-5386-0796-1 |
| Juliet A Murali,T Brindha., Analysis of Scheduling Algorithms in Hadoop, Communications in Computer and Information Science book series , , 2018, 1865-0929 |
| Sethulekshmi Raju ,Naveen Jacob, A Low Power Content Addressable Memory with Self-Control Mechanism and Segmented Matchlines, Proceedings of IEEE International Conference on Energy, Communication, Data Analytics and Soft Computing (ICECDS), 2018, 978-1-5386-1887-5 |
| Anu Mary Sunny , Naveen Jacob, Application of Distributed Arithmetic in Image and ECG Signal Processing, Proceedings of IEEE International Conference on Current Trends in Computer, Electrical, Electronics and Communication (CTCEEC), 2018, 978-1-5386-3243-7 |
| Naveen Jacob, Muralidhar Kulkarni & Krishnamoorthi K., A Compact Reconfigurable Penta-Band Artificial Magnetic Conductor for WiFi Applications, Proceedings of IEEE–INAE Workshop on Electromagnetics (IIWE-2018), 2018, Nil |
| Jibin Boban,Arun Lawrence, Manesh K K, Leeba Varghese, Effect of polarity in micro-electrical discharge machining, Emerging Trends in Engineering, Science and Technology for Society, Energy and Environment - Proceedings of the International Conference in Emerging Trends in Engineering, Science and Technology, ICETEST 2018, 2018, 978-1-3511-2414-0 |
| M.J. Neena ,M. Harikrishna , M.V.L.R. Anjaneyulu, Operating speed of different classes of vehicles at summit vertical curves on two-lane non-urban roads, Proceedings of the International Conference in Emerging Trends in Engineering, Science and Technology, 2018, 978-1-3511-2414-0 |
| Anitha Rajan, Premanand M.E, Grammar worksheets, Enhance your English, 2017, 9788130023199 |
| Jerry Varghese, K.T. Akhil, Arun Raphel, Frenosh K Francis, Vinoj K, To Study the Cooling Rate and Influence of Boron Carbide on Mechanical Properties of Aluminium LM13 Matrix B4C Reinforced Composites , Materials Today: Proceedings 4 , 7202-7207, 2017, 2214-7853 |
| Robin Joyce,Minu George,Lokasani BhanuprakashDeepak Kumar Panwar,Ravi Raj Batia,Soney Varghese, Investigation on the effects of low temperature anodic bonding and its reliability for MEMS packaging using destructive and non-destructive techniques, Journal of Materials Science: Materials in Electronics, 2017, 0957-4522 |
| Jerry Varghese, K.T. Akhil, K Shunmugesh, Vinoj K, Sanjivi Arul, R Sellamuthu, Influence of heat Treatment and aging process on LM13 Aluminium Alloy Cast Sections: An Experimental Study, Materials Today: Proceedings 4 , 7202-7208, 2017, 2214-7853 |
| K. Shunmugesh K.T. Akhil S.Aravind M.Pramodkumar, Optimization of Drilling Characteristics using Grey-Fuzzy logic in Glass Fiber Reinforced Polymer (GFRP), Materials Today: Proceedings (Elsevier), 2017, 2214-7853 |
| B Thamotharan, Vaithiyanathan, Venkatraman, Anishin Raj M.M, B Karthikeyan , A novel image processing approach for finding the bubble count in neutron dosimeter, Disaster Advances, 2017, 0974-262X |
| K. Shunmugesh K. Panneerselvam, Optimization of Drilling Process Parameters Via Taguchi, TOPSIS and RSA Techniques, Archives of Metallurgy and Materials, 2017, 1733-3490 |
| Leeba Varghese, S. Aravind, K. Shunmugesh, Multi-Objective Optimization of Machining Parameters during Dry Turning of 11SMn30 Free Cutting Steel Using Grey Relational Analysis, Materials today : Proceedings, 2017, 2218-7853 |
| G Vijayakumar, S Chandramouli, B.K Nashine, P.Selvaraj, K.K Rajan , Leak Experiments in LEENA Facility with modified Leak Detector Layout Large Pipelines, Annals of Nuclear Energy, 2017, 0306-4549 |
| G. Padmakumar,K. Velusamy,B.V.S.S Prasad,K.K Rajan , Hydraulic characteristics of a fast reactor fuel subassembly: An experimental investigation, Annals of Nuclear Energy, 2017, 0306-4549 |
| T. Chinna Pamulety, Joby George and V.M. Pillai, An Inventory Position-Based Policy for Better Supply Chain Performance, Journal of Industrial and Production Engineering, 2017, 2168-1023 |
| Ch Mahendra,P.M Satya Sai,Anand Babu,K.K Rajan , Transport phenomena in the electrodeionization of cesium from AMP-PAN, Separation Science and Technology (Philadelphia), 2017, 0149-6395 |
| ArunRaphel, S.Kumaran, VinoadhKumar, LovinVarghese, Oxidation and Corrosion resistance of AlCoCrFeTi High Entropy Alloy, Materials Today Proceedings 4 ,195-202, 2017, 2214-7853 |
| Genuvin Cyriac, Bins Paul, KT Akhil, K Shunmugesh, The Effect of Fiber Loading on the Mechanical Behaviour of Carbonaramid Hybrid Composites, Polymers & Polymer Composites, 2017, 0967-3911 |
| Blaise Solomon, Davis George, K Shunmugesh, KT Akhil, The Effect of Fibers Loading on the Mechanical Properties of Carbon Epoxy Composite, Polymers & Polymer Composites, 2017, 0967-3911 |
| N.S Shivakumar,Nagaraju Bekkenti,S. Suresh Kumar,N. Ravichandran,V.Vinod,G.Padmakumar,K.K Rajan , Evaluation of hydraulic characteristics of Core Flow Monitoring Mechanism for PFBR, Annals of Nuclear Energy, 2017, 0306-4549 |
| Aravind, S., Shunmugesh, K., Biju, J., & Vijayan, J. K, Optimization of Micro-Drilling Parameters by Taguchi Grey Relational Analysis, Materials Today: Proceedings,, 2017, 2214-7853 |
| Aruna B., Devanathan R., Necessary and sufficient condition for modified Nevanlinna-Pick interpolation for closed-loop pole placement, Control Theory and Technology, 2017, 2095-6983 |
| Sajan T John, Sridharan, R., and Ram Kumar, P. N. , Multi-period reverse logistics network design with emission cost, International Journal of Logistics Management, 2017, 0957-4093 |
| S Aravind, K Shunmugesh, KT Akhil, M Pramodkumar, Process Capability Analysis and Optimization in Turning of 11sMn30 Alloy, Materials Today: Proceedings,, 2017, 2214-7853 |
| KT Akhil, K Shunmugesh, S Aravind, M Pramodkumar, Optimization of Drilling Characteristics using Grey Relational Analysis (GRA) in Glass Fiber Reinforced Polymer (GFRP), Materials Today: Proceedings,, 2017, 2214-7853 |
| Simi zerine sleeba ,M.G. Mini, An enhanced model for reliable deflection routing in mesh network on chip, International Journal of High Performance Systems Architecture, 2017, 1751-6536 |
| P. Lijukrishnan,D. Ramdasu,V. Vinod,G. Padmakumar,K.K. Rajan, Numerical simulation and experimental validation of future FBR surge tank hydraulics, Proceedings of the 5th International and 41st National Conference on FMFP 2014, 2017, 978-81-322-2743-4 |
| B. Karthikeyan; A. Deepak; K.S. Subalakshmi; Anishin Raj M M; V. Vaithiyanathan, A Combined approach of Steganography with LSB Encoding technique and DES Algorithm, IEEE Proceedings of the Third International Conference on Advances in Electrical, Electronics, Information, Communication and Bio-Informatics (AEEICB), 2017, 978-1-5090-5434-3 |
| B. Karthikeyan;K. P. Akshaya;V. S. Ramanujan;C. S. Srirag, A simple bit plane based robust watermarking scheme, IEEE Proceedings of the International Conference on Intelligent Computing and Control Systems, 2017, 978-1-5386-2745-7 |
| M. Rajasekhar Reddy;R Akilandeswari;S. Priyadarshini;B. Karthikeyan;E. Ponmani, A modified cryptographic approach for securing distributed data storage in cloud computing, IEEE Proceedings of the 2017 International Conference on Networks & Advances in Computational Technologies , 2017, 978-1-5090-6590-5 |
| Sinnu Susan Thomas;Sumana Gupta;Venkatesh K. Subramanian, Smart surveillance based on video summarization, Proceedings of IEEE TENSYMP 2017 - IEEE International Symposium on Technologies for Smart Cities, 2017, 978-1-5090-6255-3 |
| Himanshu Kumar;Saumik Bhattacharya;Sinnu Susan Thomas;Sumana Gupta;K. S. Venkatesh, Design of smart video surveillance system for indoor and outdoor scenes, Proceedings of IEEE International Conference on Digital Signal Processing, DSP, 2017, 978-1-5386-1895-0 |
| B. Karthikeyan;A. Deepak;K.S. Subalakshmi;Anishin Raj M M;V. Vaithiyanathan, A combined approach of steganography with LSB encoding technique and des algorithm, Proceedings of the 3rd IEEE International Conference on Advances in Electrical and Electronics, Information , Communication and Bio-Informatics, AEEICB 2017 ( SCOPUS Indexed), 2017, 978-1-5090-5434-3 |
| Satyanarayana Vollala; S. Indrajeet; Amit D. Joshi; P. S. Tamizharasan; Jobin Jose, Implementation of algorithms for L(2,1)-coloring problems, IEEE conference proceedings, 2017, 978-1-5090-3038-5 |
| TG Unnikrishnan, Cherian Paul, R Sellamuthu, Sanjivi Arul, An investigation on the effects of Co, Ti and Si on microstructure, hardness and wear properties of AlCuNiFe based entropy alloys, Materials Today: Proceedings, 2017, 2214-7853 |
| Joby George and V. Madhusudanan Pillai, Transfer Function Models of Inventory Policies and Bullwhip Quantification in Supply Chain, Procedia Technology, 2016, 2212-0173 |
| V. Babu,M. Sai Baba,B.P.C Rao,K.K Rajan , Numerical simulation of Miniature Mutual inductance type leak detector for FBTR, IETE Technical Review, 2016, 0256-4602 |
| P Dhanasekaran,P.M Satya Sai,C.Anandababu,K.K Rajan , Defluoridation of water by chemical impregnated Artocarpus hirsutus sawdust, Water Science and Technology: Water Supply, 2016, 1607-0798 |
| V.Prakash,p Anup Kumar,K.K rajan,Krishnan Balasubramaniam, Ultrasonic technique for vibration measurements on PFBR fuel subassemblies, Journal of Vibration Engineering and Technologies, 2016, 2523-3939 |
| Ranga Ramakrishna,S.Kishore, S.Chandramouli, V.A Suresh Kumar, V.Prakash,K.K Rajan , Experimental studies on acoustic leak detection in steam generators of Fast Breeder Reactor, Journal of Maintenance Engineering, 2016, 1355-2511 |
| Muhammad Sabih,K.K Rajan ,V.Prakash,V.A Suresh Kumar,G Padmakumar, Design and performance evaluation of Core flow monitoring mechanisms for PFBR, Annals of Nuclear Energy, 2016, 0306-4549 |
| Vinod B,Sreedhar BK,G.Padmakumar,K.K Rajan , Optimization of thermal baffle for liquid metal injection nozzle, International of Journal of Nuclear Energy science and technology, 2016, 1741-6361 |
| S.P. Patak,V.A Suresh Kumar,I.B Noushad,K.K Rajan ,K Velusamy,C Balaji, Porous Body Model Based Parametric Study for Sodium to Air Heat Exchanger used in Fast Reactors, Journal of Thermal Science and Engineering Applications, 2016, 1948-5093 |
| Jobin Jose, N Ramasubramanian, A survey on last level cache partitioning techniques in chip multi-processors, International Journal of Control Theory and Applications, 2016, 0974-5572 |
| Jina Varghese,K.N Ramachandran Nair, Detecting video shot boundaries by modified tomography, Proceedings of the Third International Symposium on Computer Vision and the Internet, 2016, 978-1-4503-4301-5 |
| Jina Varghese,K.N Ramachandran Nair, An Algorithmic Approach for General Video Summarization, Proceedings of the IEEE 5th International Conference on Advances in Computing and Communications,, 2016, 978-1-4673-6994-7 |
| Venkata Keerthy S;Rhishi Kishore T K C;Karthikeyan B;Vaithiyanathan V;Anishin Raj M M, A hybrid technique for quadrant based data hiding using Huffman coding, Proceedings of the IEEE International Conference on Innovations in Information, Embedded and Communication Systems , 2015, 978-1-4799-6818-3 |
| S. Sriram;B. Karthikeyan;V. Vaithiyanathan;M.M. Anishin Raj, An approach of cryptography and steganography using rotor cipher for secure transmission, Proceedings of the IEEE International Conference on Computational Intelligence and Computing Research, 2015, 978-1-4799-7849-6 |
| Sony Kurian, T. K. Sindhu, Elizabeth P. Cheriyan, Composite pricing strategy for energy storage in wind electric generation, 2015 IEEE PES Asia-Pacific Power and Energy Engineering Conference (APPEEC), Brisbane, Australia, 2015, 978-1-4673-8132-1 |
| Rajesh Cherian Roy, The Relationship between the WHT and the CIT, Procedia Computer Science, 2015, 1877-0509 |
| Jyothi Joms, V K Vanitha Rugmoni, A Novel Multiple Errors Recovery Technique in TMR Systems, Proceedings of the International Conference on Instrumentation,Electrical and Electronics Engineering, 2015, 978-93-85225-36-9 |
Fabrication Laboratory Facilities at VJCET:- VIEW
The Fab Lab established at VJCET mainly comprises of the following inventories.
